Installation Guide

66
KX
KX
3/4" (19 mm)
CENTER
Flush Flush
Flush
2" Finish nails
2" Finish nails
into wall frame
3/4" Screws
from inside
Flush
Mark
Mark
SHUTTERS / WINDOW TRIM
FINISH
4
PARTS REQUIRED:
Locate one shutter centered on marks as
shown.
x6
x20
2
3
First, attach shutter using a 2"  nish nail at "dot".
Nail into wall frame inside.
Then, from INSIDE of the shed, use three 3/4"
screws to secure the shutter indicated at "X".
Repeat steps to attach shutter on opposite side.
Locate KX centered on mark and  ush to
shutters as shown. Attach using 2"  nish
nails. Nail into window frame inside.
You have  nished installing your shutters
and window trim.
2" (5 cm)
5/8 x 3 x 21-3/4" (1,6 x 7,6 x 55 cm)
x2
KX
x2
8-3/8"
(21,3 cm)
8-3/8"
(21,3 cm)
12-1/2"
(31,8 cm)
12-1/2"
(31,8 cm)