Installation Guide

46
DOOR SUPPORT
PARTS REQUIRED:
2" (5 cm)
x22
x1
5/8 x 3-7/8 x 96" (1,6 x 9,8 x 244 cm)
FINISH
4
Position support  ush with bottom edge of top plate and
side wall panel and attach with 2" (5 cm) nails as shown.
Remove temporary brace after support is installed.
Use exterior-rated wood glue behind support. Apply to
top plate and end of rafter
You have  nished your door frame support.
2
3
Door opening
Remove
After door
Frame support
Is attached
Flush
Glue
Flush
Flush
6"
(15,2 cm)