Installation Guide

36
6"
(15 cm)
6"
(15 cm)
64"
(162,6 cm)
FRONT WALL INSTALLATION
Nail down the bottom plate using two 3"
nails between the wall studs. (Fig. D).
Screw through the front wall trim into
the top and bottom plates using one 3"
screw (Fig. E, F).
Repeat process to secure the left side of
the front wall.
You have nished standing your front wall.
4
PARTS REQUIRED:
x8
x41
6"
(15 cm)
2"
(5 cm)
Nail
Fig. B
Trim
Fig. A
CENTER
2" (5 cm)
Nail
Trim
Fig. C
Fig. D
Same
Measurement
2" (5 cm)
Nail
3" (7,6 cm)
Screw
Panel
Fig. E
3" (7,6 cm)
Screw
3" (7,6 cm)
Nails
Fig. F
Center front wall on oor side-to-side.
Check the 64" door opening is held
before nailing.
Nail the front wall ush to the oor using
2" nails 6" apart. Angle nails to hit oor
frame (Fig. A).
Nail the lower side wall corner to the side
wall trim with one 2" nail (Fig. B).
1
2
BEGIN
2" (5 cm) x26
3" (7,6 cm)
x4
3" (7,6 cm)
Be sure the measurement between the
panel edge and the trim is the same
along the entire length. Then secure with
one 2" nail in the upper corner (Fig. C).
Nail along the panel edge into the trim
using 2" nails spaced 6" apart.
3
Stand front wall on oor.
It is important to secure the front wall in the following order.