User Guide

Heat & Glo • Soho-CE • 2111-900 Rev. D • 6/07
6
B
C
A
A
1.3 cm
ALCOVE
INSTALLATION
TOP VENT,
ONE 90º ELBOW
B
D
MINIMUM
Figure 3.1 Appliance Locations
ABCD
Centimeters 84.1 74.0 118.7 89.2
In addition to these framing dimensions, also reference the following sections:
• Clearances and Mantel Projections (Sections 3.C and 11.B).
• Flue Clearances and Framing (Section 6).
3
3
Framing and Clearances
Note:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffi c areas.
A. Selecting Appliance Location
When selecting a location for your appliance it is important
to consider the required clearances to walls (see Figure
3.1).
NOTE: For actual appliance dimensions refer to Sec-
tion 16.
WARNING