- Herath and Home Indoor/Outdoor Gas Fireplace Installation and Operation

Heat & Glo LifeStyle Collection • Twilight-II-B • 2108-900 Rev. M • 11/0824

C. Installing Non-combustible Facing Mate-

rial (Outdoor Side)

• Attach the left and right side pieces to the framing mem-

bers. (See Figure 7.9).

Figure 7.8 Attaching Non-combustible Facing Material

(Outdoor Side Only)

• Use a wet or dry towel or soft brush to remove dust or

dirt from facing material.

• Apply a non-combustible adhesive to attach tile, stone

or other non-combustible ﬁ nishing materials per manu-

facturer’s instructions.

Figure 7.9 Complete Installation of Non-combustible

Facing Material (Outdoor Side)

Fire Risk.

• Follow these instructions exactly.

• Facing materials must be installed properly to

prevent ﬁ re.

• No materials may be substituted

without authorization by Hearth & Home

Technologies.

• Center and attach two top boards (the two shorter pieces)

to the framing members. See Figure 7.8.

• Use fasteners from fastener packet (in manual bag) in

shaded areas (see Figure 7.8).

• Use regular sheetrock screws in non-shaded areas.

WARNING

Apply fasteners from

fastener packet

in these areas.

47-5/8 in.

49-5/8 in.

NON-COMBUSTIBLE

FACING MATERIAL