Download

Troubleshooting
Problem
Possible Cause
Solution
Lid does not lock.
The ring is not properly installed.
Reinstall the ring.
The float is seized by the push rod.
Push the rod with hands.
Lid won’t open after the air
exhaust.
The float is still up.
Press the float down.
Air escapes from the rim of
the lid.
No sealing ring was installed.
Install the sealing ring.
Food residue on sealing ring.
Clean the sealing ring.
Sealing ring worn out.
Replace the sealing ring.
Lid not locked properly.
Rotate lid fully.
Air escapes from the float
valve.
Food stuck on the sealing ring of
the float valve.
Clean the sealing ring.
The sealing ring wore out.
Replace the sealing ring.
Float valve will not rise.
The pressure limit valve is not
placed properly.
Place the valve to pressure.
Not enough food and water.
Check recipe for proper quantity.
Air escaping from the rim of the
lid and the pressure limit valve.
Call our Consumer Service Center.
Display E1
Sensor control- broken circuit.
Call our Consumer Service Center.
Display E2
Sensor control- short circuit.
Wait until it cools down.
Display E3
Inner pot temperature overheats.
Call our Consumer Service Center.
Display E4
Pressure switch error.
Call our Consumer Service Center.
Features
Voltage
220-240V
Power
1000W
Capacity
6L
Diameter
22cm
Work Pressure
0-70kPa
Pressure Limit
90kPa
Keep Warm
60-80℃
Accessories
Power supply cord
Measuring cup
Spoon
Instruction book
Recipe book