Download
Refer to the chart below for different cooking options.
SOUP
CHICKEN
BEEF
FISH
RICE
SLOW COOK
STEAM
CAKE
Default pressure time - Light
20
10
15
6
8
1 hour
8
18
Default pressure time - Standard
25
15
20
8
12
2 hours
10
Default pressure time - Strong
30
18
25
12
15
3 hours
15
Pressure range – manually set
10-50
5-30
1-30
8-15
5-20
1-3 hours
1-30
n/a
Note: During the cooking process, the cooking timer only begins once the desired pressure has been
reached, which can take approximately 5-10 minutes.
5. Cooking times: there are 6 cooking times, P 10/ P 15 / P 20 / P 25 / P 30 / P 35. Press the ‘COOK’
button repeatedly to change between the cooking times.
6. Cooking at a future time: The appliance can be preset up to 24 hours in advance.
1) Prepare the food and place it into the inner cooking pot.
2) Secure the lid and turn it counter-clockwise to lock it in place.
3) Make sure the float valve is set to the closed position.
4) Plug in the power cord. The LED screen will display 00:00.
5) Press the ‘PRESET TIME’ button, then press + or - to adjust the delay in 30 minute increments.
6) Select the cooking preset for the food, and it will start counting down after a 5 second wait.
7. Keep warm mode: When 00:00 is shown on the LED screen after cooking, pressing the ‘KEEP WARM’
button keeps the temperature between 60°- 80°C. The appliance will give a short beep and the LED
screen will display ‘bb’. Note: Keep warm shows ‘bb’ and off shows 00:00.
8. Off: When the appliance is off, the indicator light is off. No matter what function is chosen once off,
the unit will remain in stand-by.
Cleaning
1. Unplug the power cord.
2. Clean the housing body with a soft cloth such as a paper towel or microfiber towel. Do not immerse
the housing body in water.
3. Rinse the underside of the lid, sealing ring, pressure limit valve, anti-block cover, air escape, and float
valve with warm water. Dry completely.
4. The cooking pot is dishwasher-safe. To hand-clean the cooking pot, use a soft cloth or sponge and
wipe. Be careful to not damage the inside coating. Never use harsh chemicals or scouring pads.
5. To clean the sealing ring, hold the knob on the sealing ring supporting cover and pull the sealing ring
up. After cleaning, put the sealing ring supporting cover back in place.