Download

8. With the appliance switched on and the LED display on, press the preset buttons to select the desired
cooking function. The function light will flash. The preset buttons are Soup, Chicken, Beef, Fish, Rice,
Slow Cook, Steam and Cake.
9. When the pressure inside hits the proper level, the pressure hold indicator turns on and the timer
begins counting. Pay attention, the pressure inside is very high so it needs released through the vent
valve before opening the cover.
10. When the pressure cooking cycle is finished, the unit will automatically switch to the Keep Warm
mode. Release the float valve and wait for the pressure to release completely until the floater drops
down. Then you can unplug the unit and take out the food. (Figure J-1,J-2). After entering Keep Warm
mode: if you do not want to continue this mode, you can unplug the power supply. For safety reasons,
after 12 hours of continuous Keep Warm mode, the appliance will automatically switch off to stand-by.
Operating instructions
1. When the appliance is turned on there will be a ‘BEEP’ sound and the LED screen will display 00:00.
The appliance is now in stand-by and one of the preset buttons (Soup, Chicken, Beef, Fish, Rice, Slow
Cook, Steam or Cake) can be selected.
2. Once a preset has been selected, the display will show the letter P followed by the number of minutes
the meal will cook for. For example, if the display shows P25, the cooking time will be 25 minutes. Once
the time is set or adjusted, the appliance will automatically start cooking after a 5 second wait.
3. Manual pressure setting: After selecting one of the preset cooking options, pressing ‘SELECT’ again
will give the options ‘Light’, ‘Standard’ or ‘Strong’. For example, pressing the ‘Soup’ button, then pressing
the ‘SELECT’ button; ‘Standard’ will show and the hold pressure time will be 25 minutes. Pressing the
‘SELECT’ button again will show ‘Strong’ and the hold pressure time will be 30 minutes. Pressing the
‘SELECT’ button yet again will show ‘Strong’ and the hold pressure time will be 20 minutes.
4. Manual time setting: After selecting one of the preset cooking options, pressing ‘PRESET PRESSURE’
and then + or – will adjust the minutes. For example, pressing the ‘Soup’ button, then pressing the
‘PRESET PRESSURE’ button, and finally pressing + or - will adjust the minutes up or down.