Instructions / Assembly
17
TAKING YOUR BLOOD PRESSURE READING (continued)
7. When all the air is deflated, the measurement is complete.
The unit will display your blood pressure (systolic and
diastolic) measurements and pulse rate, Fig. 7. Record your
readings in a chart.
8. Your measurements will automatically be saved in memory.
9. Press the POWER button to turn the power OFF, or the unit
will automatically shut OFF after approximately 3 minutes.
NOTE: The measurement can be stopped at anytime by pressing
the POWER button.
NOTE: The default setting of this monitor is to inflate the cuff to approximately 190
mmHg. After three readings, the cuff will inflate to approximately 40 mmHg higher than
the average of the last three systolic test reading averages stored in memory. If the
system detects that the cuff needs additional pressure, it will automatically re-inflate to
approximately 40 mmHg higher than the last pressure level.
mmHg
M
D
Fig. 5