Instructions / Assembly
13
Select the appropriate user bank.
1. When the unit is off, press and hold the POWER for 5
seconds to enter into the Date/Time mode. The User 1
symbol will begin to flash, Fig. 1.
2. Press the POWER button to select User 1 and move into the
date/time setting.
NOTE: Setting the date / time for User 1 will automatically keep
the same date / time for User 2.
Setting the Date / Time
3. The month followed by the day will begin to flash, Fig. 2.
4. Scroll through the numbers by pressing the MEMORY
button.
NOTE: To scroll through the numbers quicker, hold down the
MEMORY button.
5. Press the POWER button to set the entry.
6. Repeat steps 4 and 5 to adjust the date/time setting.
7. After setting the minutes, the unit will automatically cycle
back to the flashing user symbol. Press and hold the
POWER button until the unit turns off to save the settings
and exit the date and time setting mode.
AVG
mmHg
kPa
No
(
( )
)
/
/
Fig. 1
SETTING THE DATE / TIME
Fig. 2
AVG
mmHg
kPa
No
(
( )
)
/
/