Instructions / Assembly

BATTERY INSTALLATION/REPLACEMENT

1. Slide the cover upward and remove the cover.

2. Insert or replace 4 “AA” batteries into the

compartment, matching the indicated polarity

symbols, Fig. 1.

3. To close, replace cover and slide downward

until cover clicks into position.

The monitor, the batteries and the cuff, must be disposed of according to local

regulations at the end of their usage.

NOTE: Replace the batteries when the Low Battery symbol appears on the display or

when the display remains blank when the POWER button is pressed.

4. It is recommended to remove the batteries if the unit will not be used for an extended period

of time.

AC Power Adapter (optional)

Use the AC adapter (DC 6.0V, 600mA) for battery-free operation. The AC adapter plugs into the

back of the unit as shown, Fig. 2. Please remember to practice electrical safety precautions while

using the adapter. Use of any other type of adapter may harm the unit.

Fig. 1

AC Adapter Port

Fig. 2