Instructions / Assembly
13
Select the appropriate user bank.
1. When the unit is OFF, press the SET button to enter into the user
mode. The User 1 symbol will begin to flash, Fig. 1.
2. Press the MEMORY button to select User 1 or User 2 and move
into the date/time setting. Press SET to confirm.
NOTE: Setting the date / time for User 1 will automatically keep the
same date / time for User 2.
Setting the Date / Time
3. The month followed by the day will begin to flash, Fig. 2
4. Press the MEMORY button to change until the desired number
appears.
NOTE: To scroll through the numbers quicker, hold down the
MEMORY button.
5. Press SET to confirm.
6. The date followed by the hour and minutes will blink. Repeat
steps 4 and 5 to adjust the date/time setting.
7. After setting the minutes, the unit will automatically cycle back to
the flashing user symbol. Press and hold the POWER button until
the unit turns OFF to save the settings and exit the date and time
setting mode.
AVG
mmHg
kPa
No
(
( )
)
/
/
Fig. 1
SETTING THE DATE / TIME
AVG
mmHg
kPa
No
(
( )
)
/
/
Fig. 2