User's Manual

8. After the monitor has determine your blood pressure andpulse

rate, the cuff automatically deflates. Your systolic rate, diastolic

rate, pulse rate and corresponding Risk Category Indicator and

Irregular Heartbeat Detector (if any) are displayed with date

and time for 1 minute and save results to memory

automatically (Time & Date changed per 2 seconds).

*Note

！

1. Do not inflate the cuff until it is wrapped around your upper arm.

2. Without any operation for 1 minute, device turns to the sleeping mode.

2. To stop measurement, press START/STOPbutton.

3. Press MEM key to memory mode.

4. Press key to Date/ Time Setting Mode.

5. Press USER 1/2 to Change User.

6. Press START/STOP key to stop measurement to Sleeping Mode.

7. Press AM/PM Average key to display AM/PM average.

Measurement Procedure

Inflation

1 min countdown

All Segments

Inflation

1 min countdown

Average of

Multi-Measurement