User's Manual

17
Features
 Bluetooth Data Transmission
HL858CC features a built-in “Bluetooth Data Transmission” function, which
enables the device automatically transmit measuring results to paired
Bluetooth deviceafter measurement.When connection established, BPM
would transmit memory data such as Measure Date, Systolic, Diastolicand
Pulse to the Bluetooth enabled device.
If paired Bluetooth device is not working or is not within RF range of this
device, the measuring results will be stored in the blood pressure monitor's
memory. Besides, user can press “ ” button for 3 seconds to resend the
measurement data.
Bluetooth compatibility with blood pressure monitor for Bluetooth-enabled
device is:
 Bluetooth 4.0 for Android 4.3 or above,
 Bluetooth 4.0 for iOS 5.0 or above
*Note！
 HL858CC is subject to and complies with electromagnetic compatibility
(EMC) standard of IEC 60601-1-2,EN 301 489-1, EN 301489-17, EN
300328 andU.S. federal guidelines, Part 15 of the FCC (Federal
Communications Commission) rules for devices with RF capability. These
guidelines help ensure that your device will not affect the operation of
other nearby devices. Additionally, other devices should not affect the use
of your device.
 Other wireless devices that are in use nearby, such as a cell or mobile
phone, or a wireless network, may prevent or delay the transmission of
data from your device to paired Bluetooth device. Moving away from the
source of the interference or turning off these devices to resolve the
problem.
 Make sure HL858CC and paired Bluetooth device are within acceptable
distance (no more than 10 meters) with each other. If not, put them
closer.
 Be sure to select the correct User on the monitor before your blood
pressure measurement begins.