Safety Information

Page 54 of 63 Report No.: CQASZ20210400194S
IEC 62368-1
Clause Requirement + Test Result - Remark Verdict
T.7 TABLE: Drop tests N/A
Part/Location Material Thickness
(mm)
Drop Height
(mm)
Observation
-- -- --
--
*
Supplementary information:
* During and after the tests, the energy source did not become accessible.
T.8 TABLE: Stress relief test P
Part/Location Material Thickness
(mm)
Oven
Temperature
(C)
Duration
(h)
Observation
The complete
EUT
Plastic
See table
4.1.2
70 7 *
Supplementary information:
* There was no softening of the enclosure, shrinkage, warping, cracking or other signs of deterioration that would
result in exposure of internal parts. Creepage and Clearance spacings were not reduced.