Safety Information

Page 32 of 63 Report No.: CQASZ20210400194S
IEC 62368-1
Clause Requirement + Test Result - Remark Verdict
M.4.4.3 Drop and charge/discharge function tests N/A
Drop N/A
Charge N/A
Discharge N/A
M.4.4.4 Charge-discharge cycle test N/A
M.4.4.5 Result of charge-discharge cycle test N/A
M.5 Risk of burn due to short circuit during carrying N/A
M.5.1 Requirement N/A
M.5.2 Compliance and Test Method (Test of P.2.3) N/A
M.6 Prevention of short circuits and protection from
other effects of electric current
N/A
M.6.1 Short circuits N/A
M.6.1.1 General requirements N/A
M.6.1.2 Test method to simulate an internal fault N/A
M.6.1.3 Compliance (Specify M.6.1.2 or alternative
method) ............................................................. :
N/A
M.6.2 Leakage current (mA) ........................................ : N/A
M.7 Risk of explosion from lead acid and NiCd
batteries
No such battery used N/A
M.7.1 Ventilation preventing explosive gas
concentration
N/A
M.7.2 Compliance and test method N/A
M.8 Protection against internal ignition from external
spark sources of lead acid batteries
No such battery used N/A
M.8.1 General requirements N/A
M.8.2 Test method N/A
M.8.2.1 General requirements N/A
M.8.2.2 Estimation of hypothetical volume Vz (m
3
/s) ....... :

M.8.2.3 Correction factors ................................................ :

M.8.2.4 Calculation of distance d (mm) .......................... :

M.9 Preventing electrolyte spillage N/A
M.9.1 Protection from electrolyte spillage N/A
M.9.2 Tray for preventing electrolyte spillage N/A
M.10 Instructions to prevent reasonably foreseeable
misuse (Determination of compliance: inspection,
data review; or abnormal testing) ...................... :
N/A