Safety Information

Page 23 of 63 Report No.: CQASZ20210400194S
IEC 62368-1
Clause Requirement + Test Result - Remark Verdict
F.2.1 Letter symbols according to IEC60027-1 P
F.2.2 Graphic symbols IEC, ISO or manufacturer
specific
P
F.3 Equipment markings P
F.3.1 Equipment marking locations Equipment marking is located on
its exterior surface and is readily
visible
P
F.3.2 Equipment identification markings P
F.3.2.1 Manufacturer identification ................................ : See marking plate

F.3.2.2 Model identification ............................................ : See marking plate

F.3.3 Equipment rating markings P
F.3.3.1 Equipment with direct connection to mains P
F.3.3.2 Equipment without direct connection to mains N/A
F.3.3.3 Nature of supply voltage ...................................... : Symbol “ ” provided

F.3.3.4 Rated voltage ...................................................... : See marking plate

F.3.3.4 Rated frequency .................................................. : See marking plate

F.3.3.6 Rated current or rated power .............................. : See marking plate

F.3.3.7 Equipment with multiple supply connections No multiple supply connections N/A
F.3.4 Voltage setting device No voltage setting device N/A
F.3.5 Terminals and operating devices No terminals and operating
devices
N/A
F.3.5.1 Mains appliance outlet and socket-outlet
markings ............................................................. :
P
F.3.5.2 Switch position identification marking ................ : P
F.3.5.3 Replacement fuse identification and rating
markings ............................................................. :
Fuse is replaced by the skill
person.
P
F.3.5.4 Replacement battery identification marking ....... : N/A
F.3.5.5 Terminal marking location N/A
F.3.6 Equipment markings related to equipment
classification
N/A
F.3.6.1 Class I Equipment P
F.3.6.1.1 Protective earthing conductor terminal P
F.3.6.1.2 Neutral conductor terminal N/A
F.3.6.1.3 Protective bonding conductor terminals N/A
F.3.6.2 Class II equipment (IEC60417-5172) N/A
F.3.6.2.1 Class II equipment with or without functional earth N/A
F.3.6.2.2 Class II equipment with functional earth terminal
marking
N/A