Instructions

3. Power Off:
a. Long press 3s the multi-fuction button. RED light flash 3 times.
b. 5 mins fail to connect with any device.
c. When Plug on the AUX cable
d. When Charging
4. Short press the
multi-fuction
button to play/pause the music.
5. Quick press the
multi-fuction
button twice to recall your last dial out number.
6.
When a incoming call, short press
multi-fuction
button to answer, short press again
multi-fuction
button to hang up the call. long press to reject.
7. “+”button: short press to increase the volume. Long press to skip to next track
LED Wireless headphone
1. Power On: Long press 3s the multi-fuction button.
a tone will be heard.
2.
Bluetooth Pairing mode: White light flash indicate that into pairing mode.
Choose pair
name
“ARH136”
to pair with your device. Once successful, a tone will be heard indicating that the
headphone paired.
After paired successful, white lights will turn on when without music. And white lights will slowly
flash every 5 seconds when play music.
.
8. “-”button: short press to decrease the volume. Long press to skip to previous track.
9. On lower power, a tone will be periodically heard, indicating that the headphone should be
charged. The LED indicator will turn RED while charging and turn White when fully charged.
10. SD card mode: insert the SD card to the slot, the headphone will change to SD card mode and
play the music inside it.
Charging port: Mirco USB
Battery capacity: 200mah
Charging time: around 2 hrs
Play time: Up to 8 hrs