User Manual

25
Hands-Free Mode
Hands-Free Mode enables you to adjust any of the settings on
your models by using just the footswitches and expression
pedal.
To enter Hands-Free Mode, press and hold footswitch 1 to
enter the mode select page, and then press and hold
footswitch 1 again.
To increase or decrease the value shown, move the
expression pedal.
To decrease the value shown in small increments, press
footswitch 1 and 2 () simultaneously.
To increase the value shown in small increments, press
footswitch 2 and 3 () simultaneously.
To edit the next model in your rig, press footswitch 1.
To edit the previous model in your rig, hold footswitch 1.
To show the next parameter for the shown model, press
footswitch 2.
To show the previous parameter for the shown model, hold
footswitch 2.
To exit Hands-Free Mode, press footswitch 3.
Tuner/Tempo
You can use the Tuner/Tempo page to tune your guitar and set
a tempo for time-based effects.
To enter Tuner/Tempo mode, press and hold footswitch 3
for over one second. While in Tuner/Tempo Mode, the screen
to the right is shown.
To change the tuner reference pitch, tap the parameter and
then turn the encoder.
To unmute your signal while tuning, press footswitch 1.
To enter a tempo via tapping a footswitch, press footswitch
2 at the desired tempo 3–8 times to set the tempo in beats
per minute (BPM).
To exit this page, press footswitch 3.
Tip: You can also assign Tap Tempo to a footswitch within a rig on the Hardware Assign page.