User Manual

20
Mix
These settings control mix of a split signal path. This is available
only for rigs with split signal paths (see Main Screen > Signal
Path to learn more):
Preset: This is the current mix preset, which includes its
settings on the right edge of the display.
A Lev / B Lev (Level): These settings control the volume
levels the upper (A) and lower (B) branches of the signal
path. The range is -60.0 dB to +12.0 dB.
A Pan / B Pan: These settings control the panning (position in
the stereo field) the upper (A) and lower (B) branches of the
signal path. The range is -100% to +100%.
A/B Delay: This setting controls a timing offset between the upper (A) and lower (B) branches of the signal
path. The range is -30000μs to +30000μs. If the value is negative (-), the A branch is delayed. If the value is
positive (+), the B branch is delayed.
Saving a Block Preset
To save a block preset, tap Save in the upper-right corner.
To save your changes to the current block preset, tap Save.
To save your changes as a new preset, tap Save New Preset,
use the keyboard that appears to enter a name, and then tap
Save.
To return to the previous screen without saving, tap Cancel at any time.