User Manual

15
Saving a Rig
If you have made certain changes to the rig at all since loading it, you
will see an asterisk () next to its name at the top of the screen. You
will see an asterisk if you have done any of the following:
• Assigned a model to the rig
• Deleted a model from the rig
• Moved a model in the signal chain
• Changed a model’s preset (see Adjusting Settings to learn more)
• Made any change in the Hardware Assign screen (see Hardware Assign to learn more)
Activating or deactivating a model or using the expression pedal on any screen will not cause the asterisk to
appear.
You can save these changes to this rig, save these changes as another rig, or discard them altogether.
To save a rig, tap Save in the upper-right corner. The prompt
shown left will appear.
To save your changes to the current rig, tap Save.
To save your changes as a new rig, tap Save New Rig, use the
keyboard that appears to enter a name, and then tap Save.
To return to the previous screen without saving, tap Cancel
at any time.
To discard any changes you’ve made to the rig, tap the 
button in the upper-right corner, and tap Discard Changes.
If the asterisk is shown and you try to load a different rig, you
will be asked to select one of these options:
• Cancel: This option returns to the previous screen
without saving the current rig or loading a new rig.
• Save as a New Rig: This option lets you save the
current rig as a new rig. In the screen that appears, use
the keyboard that appears to enter a name, and then
tap Save. That rig will be saved, and the new rig will
load.
• Save: This option saves any changes you made to the
rig and then loads the new rig.
• Discard Changes: This option loads a new rig without
saving any changes to the previous rig.
Deleting a Rig
To delete the current rig, tap the  button in the upper-
right corner, tap Delete Rig, and then tap Yes to continue or
No to cancel.
Note: Select Do not show this dialog again in the message to
disable these confirmation messages. You can re-enable them
in the Global Settings screen.