User Manual

30
Pedal Configuration:
External Pedal: This setting determines whether or not you are using an external expression pedal with the
HeadRush Pedalboard.
Tap On to use the built-in expression pedal to control the parameter/parameters of Bank A while your
external expression pedal controls the parameter/parameters of Bank B. (If you are using the expression
pedal’s Classic Mode, pressing the toe switch will activate or deactivate the parameter. If you are using
Advanced Mode, the toe switch will be disabled entirely.)
Tap Off to disable the expression pedal input and use the built-in expression pedal only.
Reminders:
Confirm Unsaved: This setting determines whether or
not you will see a confirmation message if you change the
rig while there are unsaved changes on the current one.
Tap On to enable these messages or Off to disable them.
Alternatively, tap Do not show this dialog again in the
message itself to disable them.
Assignments:
Auto Assign: This setting determines how models are assigned to the switches. Tap On if you want models to
be automatically assigned to the next available switch when you load them. Tap Off if you want models to load
without being assigned to a switch; you will have to assign them manually in the Hardware Assign screen.