User Manual

15
If the asterisk is shown and you try to load a different rig,
you will be asked to select one of these options:
Cancel: This option returns to the previous screen
without saving the current rig or loading a new rig.
Discard Changes: This option loads a new rig without
saving any changes to the previous rig.
Save as a New Rig: This option lets you save the current
rig as a new rig. In the screen that appears, use the
keyboard that appears to enter a name, and then tap
Save. That rig will be saved, and the new rig will load.
Save Changes to Rig: This options saves any changes
you made to the rig and then loads the new rig.
Note: Select Do not show this dialog again in the message
to disable these confirmation messages. You can re-enable
them in the Global Settings screen (see Global Settings).
To save a rig, tap Save in the upper-right corner.
To save your changes to the current rig, tap Save.
To save your changes as a new rig, tap Save New Rig,
use the keyboard that appears to enter a name, and then
tap Save.
To return to the previous screen without saving, tap
Cancel at any time.
To rename a rig, tap the  button in the upper-right
corner, and then tap Edit Rig Name.
To discard any changes you’ve made to the rig, tap the 
button in the upper-right corner, and tap Discard Changes.
Deleting a Rig
To delete the current rig, tap the  button in the upper-right corner, and
then tap Delete Rig, and then tap Yes to continue or No to cancel.