User Guide

9
To record a track, press its •Rec/Play/Dub footswitch.
To finish recording and start playback of a track, press its •Rec/Play/Dub footswitch again.
To overdub on a track that is currently playing, press the •Rec/Play/Dub footswitch again.
Important: Before recording anything, set the input volume level by turning the Input (1–4) knob for
each input you want to use.
Tip: Use the Global Settings page to set Looperboard to overdub immediately after recording a
track (instead of just playing it).
To stop a track at any point, press its •Stop/–Undo footswitch.
To stop all tracks at any point, press the Start/Stop All footswitch when one or more tracks are
playing.
To play a track, press its •Rec/Play/Dub footswitch.
To start playback of all tracks simultaneously, press the Start/Stop All footswitch when all tracks
are stopped.
To undo everything you have recorded since you last pressed a •Rec/Play/Dub footswitch,
press and hold the •Stop/–Undo footswitch for that track for approximately 1.5 seconds.
To re-add everything you just undid, press and hold the •Stop/–Undo footswitch for that track for
approximately 1.5 seconds again.