User's Manual

LAND MOBILE RADIO
HL-1000 SERIES
LAND MOBILE RADIO
HL-1000 SERIES
HL-1000 Function Summary
34
33
88.. BBAATTTTEERRYY UUSSEE && RREECCHHAARRGGEE
It's impossible to change these functions with any operation because
it's set only by using the external PC program. If you have any ques-
tions, please call the store where you bought it, agents or the main
office.
BATTERY SAVE FUNCTION
(1) Li-ion Battery used for HL - 1000 series is highly efficient, stable and
reliable.
(2) Charge the battery before using it to maintain its proper capacity and
for stable radio operation.
(3) Charge the battery to its capacity before using, and recharge it
when battery warning beeps.
(4) Battery is designed to be used only with the provided charger. So do
not charge it with other charger.
(5) When charging the battery, switch off the radio for fast charging.
(6) Beware that battery terminal does not contact the metal or any con-
ducting material as it could damage the material or hurt yourself.
1) CAUTION IN CHARGING THE BATTERIES
(1) When the radio's performance become unstable due to low voltage
of battery.
(2) When Red indicator on the radio is blinking.
(3) When battery indicator is blinking.
(4) When warning sound beeps every 10 seconds while using.
2) WHEN TO CHARGE
77.. HHLL - 11000000 FFuunnccttiioonn SSuummmmaarryy
SQUELCH
BEEP ON / OFF
DTMF ON / OFF
2TONE ANI ON / OFF
CHANNEL SCAN
VOX MODE ON / OFF
VOX SENSITIVITY
5TONE MODE ON/OFF
KEY LOCK ON / OFF
CLON MODE
REGISTER / CANCEL OF
SCAN CHANNEL LIST
PASSWORD MODE
SELCALL ID CHECKING
BATTERY WARNING
BEEP
BCLO SELECTION
TOT SELECTION
TOT TIME SETTING
BATTERY SAVE
SETTING
SCAN TIME SETTING
SCAN TYPE SETTING
DTMF SETTING
BCLO TYPE
SELECTION
VOX SETTING
2/5TONE TYPE
SELECTION
2/5TONE OPTION
SETTING
INPUT 2TONE ID /
ANI SELECTION
INPUT 5TONE ID
Receiving Sensitivity control
Beep sound when to press key button
Locking of channel in use
DTMF transmitting setting
2TONE ANI setting
Channel Scanning
VOX mode setting
VOX sensitivity setting
Switching to 5TONE CALL Mode
Cloning the program of each units (using Clone jack)
General/Priority scan channel entry/
cancellation
Password input / delete
Checking of user 2TONE / 5TONE ID
Battery warning Beep setting
BCLO setting
BCLO type selecting
TOT setting
TOT time selecting
Battery save time setting in waiting mode
Channel Scan time setting
Scan type selecting
DTMF ID / Time setting
Selecting 2/5TONE type among 11types
including EEA
TONE time setting
5TONE ID input
VOX delay time setting
2TONE ID input / ANI setting
1 TIME
2 TIMES
3 TIMES
4 TIMES
5 TIMES
6 TIMES
7 TIMES
8 TIMES
FOR 2 SECONDS
POWER
BUTTON
PTT + POWER BUTTON
ON / OFF
Enable / Disable
Carrier / Repeater
Enable / Disable
TOT Time / Penalty time
ON/OFF / ACTIVE TIME
DWELL TIME / TX TYPE
SA Combi / Carrier
ID & TIME INPUT
Delay Time INPUT
ID INPUT & ANI ON/OFF
2/5 TONE TYPE SETTING
2TONE OPTION
SETTING
ID List INPUT
POWER
BUTTON
POWER
BUTTON
Battery Use & Recharge