User's Manual

LAND MOBILE RADIO
HL-1000 SERIES
LAND MOBILE RADIO
HL-1000 SERIES
28
27
4) PASSWORD MODE
- Turn on the Power by pressing the "Down"
button.
- You can set/change/delete your password
of the radio.
- The password number can be of maximum
7digits. If you assign your password under 6
digits, save it by pressing the PTT button.
DOWN BUTTON
INPUT BUTTON
PASSWORD
INPUT BUTTON
PASSWORD
FUNCTION
BUTTON
UP BUTTON
MONITOR
BUTTON
- Setting Password : the icon" " that can
be seen on display means there is no active
password on the radio. Input the pass-word
twice (over than 4 digits)
- It'll be finished when you press the PTT but-
ton or input 7 digits. If you save a new pass-
word, you have to input the assigned pass-
word whenever you turn on the radio.
You cannot use the radio if you input the wrong
password more than 5 times. Special attention must
be paid to your password. Please call the A/S center
when you forgot your password.
- Turn on the Power by pressing the Up button.
If channels are already registered in scanned
channels' list, the icon " " will be indicated
on the LCD like the picture, if not, it'll not be
indicated.
3) REGISTER/CANCEL THE SCAN CHANNEL LIST
- Switch channels by pressing the Up/Down
button.
- Choose "Register Scan Channel" (icon " "
will appear) or "Cancel" (no " ").
- If you want to choose the priority channel,
press the "M" button on the current page.
It'll switch to the option "priority channel 1".
- Choose a "priority channel 1 by pressing the
Up/Down buttons.
- Choose the "Assign Priority Channel 1"
(icon " " will appear) or "Cancel" (no " ").
- Move to the "priority channel 2 by pressing
the "M" button.
- Choose a "priority channel 2" by pressing the
Up/Down buttons.
- Choose the "Assign Priority Channel 2"
(icon " " will appear) or "Cancel" (no " ").
- Move to the "priority channel 2" by pressing
the "M" button once.
- Turn off the Power and Turn it on again after
finishing the registration of scanning
The scan
channel list
Channel
The scan
channel
list
Channel
The scan
channel
list
Channel
How to Use the Special Mode
How to Use the Special Mode
Turn on the Power pressing
the Up button.
Press the Up/Down button.
Press the Up/Down button.
Turn on the Power pressing
the 'Down' button.