User's Manual

LAND MOBILE RADIO
HL-1000 SERIES
LAND MOBILE RADIO
HL-1000 SERIES
22
21
Example
You can get through
-Talk after Call
A is transmitting a call and B is receiving a call, the radios are on
the calling mode. At this time, these two people can talk each other
pressing the PTT button.
A
B
5TONE ID :
12345
5TONE ID :
23456
-Talk after corresponding with each other's 5TONE ID
A and B can communicate to each other by pressing the PTT but-
ton when each other's ID are on the LCD (B's ID on A's LCD, A's ID
on B's LCD) on the calling mode.
A
B
5TONE ID :
12345
5TONE ID :
23456
TRANSMIT CALLING
RECEIVE CALLING
Example
A
B
5TONE ID :
12345
5TONE ID :
23456
When A is calling B, the icon " " will be indicated on B's LCD. You will
hear an audible tone. A's 5TONE ID will appear on B's LCD.
If B cannot receive the call and there's no buttons pressed in 10 sec-
onds, the calling mode will be released and the channel will switch back
to the calling channel.
RECEIVE
CALLING
4) TRANSMIT ON THE CALLING MODE
If B cannot receive the call and there's no buttons pressed in 10 sec-
onds, the calling mode will be released and the channel will switch
back to the calling channel.
5) RECEIVE ON THE CALLING MODE
You can communicate only when your ID is received on the calling
mode. You cannot call anyone without receiving 5TONE ID. It's possi-
ble only under the detected IDs. Therefore, please switch to the gen-
eral calling channel after finishing the calling mode if you want a gen-
eral calling regardless of IDs,
How to Use 5TONE Calling Mode
How to Use 5TONE Calling Mode
TRANSMIT CALLING
RECEIVE CALLING