Installation Manual

Page 13 OfficeSense sensor installation v1.1
Mounting the sensor
To mount the devices under desks, you ideally
work with two people.
Person A: Scans QR codes for correct sensor-to-
desk mappings.
Person B: Attaches the desk sensor devices
under the desks.
In order to establish an accurate reading, we advise you to install a sensor for each seating
on the desk (see picture above).
 Now you can mount the device under the desk: make sure the orientation of the
sensor is right. The straight back of the sensor should points backwards, the
smoothed front should face towards the front of the desk.
 Hint: hold the sensor like the picture on the right for easy mounting.