Operating Manual

-4-
Important:
For best functionality, remove hair around the ears from under the cushions to improve
the acoustical seal against the head. Eyeglass temples should be as thin as possible and conform close
to the head. Turn on the headset and adjust the volume for best listening level.
4. Hard Hat Attachment
Slide the hard hat attachment into the hard hat slot and press down until it
snaps into position. When the cups are in either store or ventilation
position, the operating position is accomplished by pressing the cups
against the head until the clicking sound indicates that the cups are in
operating position. In order to prevent leakage, ensure that the neither the
cup or the suspension touches the hard hat when the cups are in the
operating position.
5. HEADSET MAINTENANCE AND USER INFORMATION
PAWN must be worn, adjusted, cleaned and maintained in accordance with the instructions in this
manual.
♦
In order to fully benefit from the superior noise attenuation, wear PAWN 100% of the time you are
exposed to noise!
♦
Regularly cleans the outside of PAWN using warm water and a mild detergent.
♦
♦♦
♦
WORNNING: The unit must not be submerged in water.
♦
Do not store or place PAWN in temperatures exceeding +55 C (13O F). Do not place the unit
behind a car windshield or in direct sunlight.
♦
Certain chemicals may negatively effect this product. The manufacturer can provide further
information.
♦
PAWN and especially the
cushions
may degrade over time and should be examined regularly to
verify that they are not cracked or otherwise damaged. Replacement cushions are available. For
cushion replacement gust pull off the old ones. Snap in the new cushions.
Important
- If these instructions are not followed properly, the noise attenuation properties and
functionality of the unit may be negatively effected.