MSDS
HD-926PDQ
Revision Date 15-Jan-2014
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 2 / 6
4. FIRST AID MEASURES
General Advice In case of rupture:
Eye Contact Rinse thoroughly with plenty of water, also under the eyelids. Keep eye wide open while
rinsing. If symptoms persist, call a physician.
Skin Contact Wash off immediately with soap and plenty of water. In the case of skin irritation or allergic
reactions see a physician.
Inhalation Move to fresh air. If symptoms persist, call a physician.
Ingestion Do NOT induce vomiting. Rinse mouth. Drink plenty of water. Never give anything by mouth to
an unconscious person. Call a physician or Poison Control Center immediately.
Notes to Physician Treat symptomatically.
Protection of First-aiders Use personal protective equipment.
5. FIRE-FIGHTING MEASURES
Flammable Properties Not flammable.
Flash Point Not determined.
Suitable Extinguishing Media Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Hazardous Combustion Products Carbon oxides.
Explosion Data
Sensitivity to Mechanical Impact No.
Sensitivity to Static Discharge No.
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective
gear.
NFPA
Health Hazard 0
Flammability 0
Stability 0
Physical and Chemical
Hazards -
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions Use personal protective equipment. Avoid contact with eyes.
Environmental Precautions Prevent entry into waterways, sewers, basements or confined areas. Do not flush into surface
water or sanitary sewer system.
Methods for Containment Prevent further leakage or spillage if safe to do so.
Methods for Cleaning Up Use personal protective equipment. Avoid dust formation. Pick up and transfer to properly
labeled containers. Clean contaminated surface thoroughly.
7. HANDLING AND STORAGE
Handling In case of rupture: Handle in accordance with good industrial hygiene and safety practice.
Avoid contact with skin, eyes and clothing.
Storage Keep container tightly closed in a dry and well-ventilated place. Keep out of the reach of
children.






