Use and Care Manual

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to

qualified service personnel if service is needed.

1. Before cleaning and assembling, do not plug the pins into the socket.

2. To ensure adequate air circulation to the motor. Keep vents at the rear of the

motor housing from dust, fluff and etc. A vancuum cleaner can not be used to

clean these vents before unplug. Do not disassemble the fan remove fluff.

3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.

Do not use any abrasive detergent or solvents to avoid scratching the sufrace.

Do not use of the following as a cleaner: gasoline, thinner, bending.

4. Do not allow water or any other liquid into the motor housing or interior parts.

CLEANING

MAINTENANCE INSTRUCTION

1. Be sure to unplug the power cord from the outlet before cleaning.

2. Plastic parts should be cleaned with mild soap and damp cloth or sponge.

Thoroughly remove soap film with clean water.

3. Be sure not to get water or other liquid enter the inside of the motor.

Dry all parts completely before reassembling and reconnecting to power

source.

PRINTED IN CHINA

SPECIFICATIONS

Model No.: WFT9

Voltage: 120V, 60Hz

SERVICE & SUPPORT

In the event of a warranty claim or if service is required for this fan, please

Toll Free: 866-876-4332 (M-F 9:00am to 5:00pm CST)

For questions or comments, please write to:

Midea USA, INC.

Att: Warranty Department

1937 N Great Southwest Parkway

Grand Prairie, TX 75050, USA

For your records, staple your sales receipt to this manual and record the

following:

DATE OF PURCHASE: ___________________________________________

PLACE OF PURCHASE:___________________________________________

(STAPLE SALES RECEIPT HERE)

NOTE: PROOF OF PURCHASE IS REQUIRED FOR

ALL WARRANTY CLAIMS