Specification

SAFETY DATA SHEET (REGULATION (EC) n° 1907/2006 - REACH) Date: 13/02/2015
Version: N°6 (29/10/2012) Revision: N°5 (01/10/2012)
Never eat, drink or smoke during use. Remove and wash contaminated clothing before re-using. Ensure that there is
adequate ventilation, especially in confined areas.
- Eye / face protection
Avoid contact with eyes.
Before handling powders or dust emission, wear mask goggles in accordance with standard EN166.
- Hand protection
Wear suitable protective gloves in the event of prolonged or repeated skin contact.
- Body protection
Work clothing worn by personnel shall be laundered regularly.
- Respiratory protection
Avoid breathing dust.
Type of FFP mask:
Wear a disposable half-mask dust filter in accordance with standard EN149.
Category:
- FFP2
Particle filter according to standard EN143:
- P (White)
Exposure controls linked to environmental protection
Local exhaust ventilation to remove material at source.
Contained storage.
Regulated waste disposal.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties
General information:
Physical state: Solid in granules.
Odor: None
Color: Black
Important health, safety and environmental information
pH: Not relevant.
pH (aqueous solution): 7-11
Boiling point/boiling range: Not specified.
Flash point interval: Not relevant.
Explosive properties, lower exclusivity limit (%): NA
Explosive properties, upper exclusivity limit (%): NA
Vapor pressure (50°C): Not relevant.
Vapor density: NA
Density: 200-700 kg/m3
Miscibility: NA
Water solubility: Insoluble. 0
Method for determining the water solubility:
OCDE Guideline 105 (Water solubility).
Partition coefficient: n-octanol/water : NA
Viscosity: NA
Evaporation rate: NA
Melting point/melting range: Not specified.
Self-ignition temperature: Not specified.
Decomposition point/decomposition range: Not specified.
9.2. Other information
Physical and chemical properties of the saturated activated carbon may be different from the virgin material.