User Manual

7 / 10
5.2 Receiver
Power LED: System power indicator.
DC 24V: Connect 24V/1A adaptor to AC wall outlet for power
supply.
HD BaseT In: Standard HD BaseT signal input port. Connect HD
BaseT Transmitter with a UTP cable following the standard of direct
interconnection method
HDMI Out: HDMI output port. This slot is where you connect the
HDTV or monitor with HDMI cable.
IR In: Channel 1 IR Receiver. Connect with Wideband IR Rx
IR Out:Channel 2 IR Transmitter. Connect with Wideband IR Tx.
RS-232: Phoenix jack provide Serial port control signal from
receiver or to receiver.
Service: Manufacturer use only.
Connection Signal Indicator Lamp
※Illuminate: The Transmitter and Receiver are in good connections status.
※Flashing: The Transmitter and Receiver are in poor connections status.
※Dark: The Transmitter and Receiver are not connected.
Data Signal Indicator Lamp
※Illuminate: The HDMI signal with HDCP.
※Flashing: The HDMI signal without HDCP.
※Dark: No HDMI signal.