User Manual

6 / 10
5. Operation Controls and Functions
5.1 Transmitter
Power LED: System power indicator.
DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply.
HD BaseT Out: Standard HD BaseT signal output port. Connect HD
BaseT receiver with a UTP cable following the standard of direct
interconnection method
HDMI In: Connect this to HDMI source devices such as Blu-ray or PS4
player
IR In: Channel 2 IR Receiver. Connect with Wideband IR Rx.
IR Out: Channel 1 IR Transmitter. Connect with Wideband IR Tx.
RS-232: Phoenix jack provide Serial port control signal from receiver
or to receiver.
SE Service: Manufacturer use only.
Connection Signal Indicator Lamp
※Illuminate: The Transmitter and Receiver are in good connections status.
※Flashing: The Transmitter and Receiver are in poor connections status.
※Dark: The Transmitter and Receiver are not connected.
Data Signal Indicator Lamp
※Illuminate: The HDMI signal with HDCP.
※Flashing: The HDMI signal without HDCP.
※Dark: No HDMI signal.