HDMI 18Gbps Extender over Cat5e/Cat6 VER: 2.1 Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. Table of Contents 1. Introduction .............................................................................. 4 2. Features .................................................................................... 4 3.
Advanced The extender will start protection mode automatically when using UTP termination, which follows the standard of cross interconnection method. 1. Introduction The 18Gbps HDMI Extender is a tool which can extend your HDMI signal over 230fts/70meters to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal which can be transmitted by LAN cable.
the HDMI Extender. 2. Features HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant Video resolutions up to 4K2K@50/60Hz (YUV444) 10bits HDR (High Dynamic Range) pass through Supports HDMI High Bit Rate(HBR) audio pass through Supports CEC bypass POC (Power Over Cable) function is supported, either TX or RX is powered by24V@1A power supply, the another does not need power supply from the DC jack. POC Power consumption is less than 10W.
Video Bandwidth Video Resolutions 18 Gbps up to 4K2K@50/60Hz(YUV4:4:4),4K2K@30Hz,1080P@120Hz, and 1080P 3D@60Hz Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2 Color Depth 10-bit, 12-bit HDMI Audio Formats LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby (Pass-through) TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X ESD Protection Human body model — ±8kV (air-gap discharge) & ±4kV (contact discharge) Connections Transmitter :1x HDMI Type A [19-pin female] 1x IR INPUT [3.
5. Operation Controls and Functions 5.1 Transmitter Power LED: System power indicator. DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply. HD BaseT Out: Standard HD BaseT signal output port. Connect HD BaseT receiver with a UTP cable following the standard of direct interconnection method HDMI In: Connect this to HDMI source devices such as Blu-ray or PS4 player IR In: Channel 2 IR Receiver. Connect with Wideband IR Rx. IR Out: Channel 1 IR Transmitter. Connect with Wideband IR Tx.
5.2 Receiver Power LED: System power indicator. DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply. HD BaseT In: Standard HD BaseT signal input port. Connect HD BaseT Transmitter with a UTP cable following the standard of direct interconnection method HDMI Out: HDMI output port. This slot is where you connect the HDTV or monitor with HDMI cable. IR In: Channel 1 IR Receiver. Connect with Wideband IR Rx IR Out:Channel 2 IR Transmitter. Connect with Wideband IR Tx.
※Description 1 POC (Power Over Cable) Application Example ※Description 2 Bidirectional Infrared control Application Example ※Description 3 Bidirectional RS232 control Application Example 8 / 10
6.
/ 10
