8Gbps HDBaseT Extender (150m) with KVM Function VER 1.
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
1. Introduction This 18Gbps HDBaseT Extender can extend HDMI signal, bi-directional IR control signal and USB KVM signal to a distance up to 150m via a single CAT6 cable. This product converts HDMI signal to standard HDBaseT signal and transmits it through LAN cable. It can easily control signal source device or display device from the remote end through bi-directional IR signal passthrough function. Video resolution up to 4K2K@60Hz YUV 4:4:4. It also supports USB KVM and POC function.
3. Package Contents ① 1 x 18Gbps HDBaseT Extender (Transmitter) ② 1 x 18Gbps HDBaseT Extender (Receiver) ③ 1 x IR Blaster cable (1.5 meters) ④ 1 x IR Receiver cable (1.5 meters) ⑤ 1 x USB cable (1.5 meters) ⑥ 4 x Mounting Ears ⑦ 8 x Machine Screws (KM3*4) ⑧ 1 x 24V/1A Locking Power Supply ⑨ 1x User Manual 4. Specifications Technical HDMI Compliance HDMI 2.0b HDCP Compliance HDCP 2.2 Video Bandwidth 18Gbps Video Resolution Up to 4K2K@60Hz YUV 4:4:4 USB Compliance IR Level USB 1.
Connection Input: Transmitter 1×HDMI IN [TypeA, 19-pin female] 1×IR IN [3.5mm Stereo Mini-jack] 1×SERVICE [Micro-USB jack] 1×USB [USB-B, 4-pin female] Output: 1×HDBT OUT [RJ45] 1×IR OUT [3.5mm Stereo Mini-jack] Input: Receiver 1×HDBT IN [RJ45 with light] 1×IR IN [3.5mm Stereo Mini-jack] 1×SERVICE [Micro-USB jack] Output: 1×HDMI OUT [TypeA, 19-pin female] 1×IR OUT [3.
5. Operation Controls and Functions 5.1 Transmitter Panel COPY SERVICE STD PWR EDID 1 HDBT OUT DC 24V 4 3 2 6 5 7 HDMI IN IR IN IR OUT PC 8 9 10 11 No. Name 1 PWR LED The red LED is on when the Transmitter is powered on. Function Description 2 EDID DIP switch Used for EDID setting (dial to COPY by default). COPY: Copy the EDID of the HDMI OUT port of Receiver. STD: Default 1080P 2CH 3 SERVICE Firmware update port.
No. 9 Name Function Description Connect to IR receiver cable, the IR receive signal will emit to the IR OUT port of the Receiver. IR IN 10 IR OUT Connect to IR blaster cable, the IR emit signal is from the IR IN port of the Receiver. 11 PC USB-B port, connecting to PC. 5.2 Receiver Panel PWR SERVICE 1 2 HDBT IN DC 24V 3 5 No. Name 1 Power LED 2 SERVICE 4 6 HDMI OUT IR IN IR OUT 7 8 9 10 Function Description The power LED is on when the Receiver is powered on.
No. Name 6 Data Signal Indicator (Yellow) 7 HDMI OUT 8 IR IN 9 IR OUT 10 USB ports Function Description ▪ Illuminate: HDMI signal with HDCP. ▪ Flash: HDMI signal without HDCP. ▪ Dark: No HDMI signal. HDMI signal output port, connecting to HDMI display device such as TV or monitor. Connect to the IR receiver cable. The IR signal will send to the IR OUT port of the Transmitter. Connect to the IR blaster cable, the IR signal is from IR IN port of the Transmitter.
6. Application Example COPY SERVICE STD PWR EDID Transmitter HDBT OUT DC 24V HDMI IN IR IN IR OUT PC LAN IR Blaster Power Supply IR Receiver DVD or Blu-ray Player IR Blaster CAT6 Cable PC UHDTV IR Receiver Keyboard Mouse LAN HDBT IN DC 24V HDMI OUT IR IN IR OUT Receiver SERVICE PWR The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
