PUV-3050RX-UA UHD+ HDMI Over HDBaseT3 Receiver with Analogue Audio I/O & USB 2.
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction ..................................................1 2. APPLICATIONS ..............................................1 3. PACKAGE CONTENTS ....................................1 4. SYSTEM REQUIREMENTS ..............................1 5. Features .........................................................2 6. Operation Controls and Functions ..............3 6.1 Front Panel ............................................................3 6.2 Rear Panel ..........................................
1. INTRODUCTION This 4K UHD+ HDMI over HDBaseT receiver uses HDBaseT 3.0, the newest generation of HDBaseT technology, and is the perfect solution for extending full bandwidth (18Gbps) HDMI 2.0, 4K@60Hz (4:4:4, 8-bit) video with HD audio via a single run of Cat.6A/7 cable over distances of up to 40 meters. Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, and USB 2.0.
5. FEATURES HDMI 2.0 and DVI 1.0 compatible HDCP 2.2 and HDCP 1.x compliant HDBaseT 3.0 compliant (Backwards compatible with HDBaseT 2.0/1.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel 1 3 7 8 IN AUDIO BYPASS OUT PUV-3050RX-UA L R AUDIO 2 T R PWR EXTRACT LINK IR 4 5 6 9 1 AUDIO IN 3-pin Terminal Block: Connect to the analogue audio output of a device such as a media player or game console using a 3-pin adapter cable. Audio is sent to the analogue audio output on the connected compatible receiver.
7 BYPASS & EXTRACT LEDs: These LEDs will illuminate to indicate if the unit is in audio bypass or extract mode. 8 POWER LED: This LED will illuminate to indicate the unit is on and receiving power. 9 LINK LED: This LED will illuminate solidly when a live connection with a compatible transmitter is active. 6.2 Rear Panel USB CAT6A/7 IN HDMI IN HDMI OUT 1 2 3 4 1 USB 2.
6.3 IR Cable Pinouts IR Blaster + IR Extender 4-pin Terminal Block 1 2 3 4 3.3V RxD GND TxD 1 2 3 4 NC GND RxD TxD 6.4 Serial Pinout 4-pin Terminal Block 6.
7. CONNECTION DIAGRAM Tower PC Local Monitor 3m 7m 3m 60° 1.5m 60° USB RS-232 IR Input & Output HDMI Input USB HDMI Output IN AUDIO BYPASS OUT L R T AUDIO Power Supply R PWR EXTRACT LINK IR TX DC24V 2.7A USB CAT6A/7 OUT HDMI IN HDMI OUT IR Input & Output IN AUDIO BYPASS OUT L R AUDIO T R PWR EXTRACT LINK IR RX USB CAT6A/7 IN HDMI IN HDMI OUT USB Cat 6A/7 Cable USB 60° 1.
8. SPECIFICATIONS 8.1 Technical Specifications HDMI Bandwidth 18Gbps HDBaseT Bandwidth 18Gbps Input Ports 1×HDBaseT (RJ-45) 1×HDMI (Type-A) 1×Analogue Stereo (3-pin Terminal Block) Output Ports 1×HDMI (Type-A) 1×Analogue Stereo (3-pin Terminal Block) Pass-through Ports 1×IR In/Out (4-pin Terminal Block) 1×RS-232 (4-pin Terminal Block) 2×USB 2.0 (Type-A) Pass-through/Service Port 1×USB 2.
8.
Input Supported Resolutions (Hz) Output HDMI HDBT HDMI 1920×1080p@24/25/30 1920×1080p@50/60 1920×1200p@60RB 2560×1440p@60RB 2560×1600p@60RB 2048×1080p@24/25/30 2048×1080p@50/60 3840×2160p@24/25/30 3840×2160p@50/60 (4:2:0) 3840×2160p@24, HDR10 3840×2160p@50/60 (4:2:0), HDR10 3840×2160p@50/60 4096×2160p@24/25/30 4096×2160p@50/60 (4:2:0) 4096×2160p@24, HDR10
8.3 Audio Specifications 8.3.1 Digital Audio HDMI & HDBaseT Input / HDMI Output LPCM Max Channels 8 Channels Sampling Rate (kHz) 32, 44.1, 48, 88.2, 96, 176.4, 192 Bitstream Supported Formats Standard & High-Definition 8.3.2 Analogue Audio Analogue Input Max Audio Level 2Vrms Impedance 10kΩ Type Unbalanced Analogue Output Max Audio Level 2Vrms THD+N < −80dB@0dBFS 1kHz (A-wt) SNR > 80dB@0dBFS Frequency Response < ±0.
8.4 Cable Specifications 1080p 4K30 4K60 8-bit 12-bit (4:4:4) 8-bit (4:4:4) 8-bit HDMI Input 10m 10m 5m 3m HDMI Output 10m 10m 5m 3m Cable Length High Speed HDMI Cable Ethernet Cable Cat.5e/6 40m Cat.6A/7 40m Bandwidth Category Examples: 1080p (FHD Video) - Up to 1080p@60Hz, 12-bit colour - Data rates lower than 5.3Gbps or below 225MHz TMDS clock 4K30 (4K UHD Video) - 4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit colour - Data rates higher than 5.
8.5 HDBaseT Features HDBaseT Feature Set Video & Audio Extension Receiver Supported LAN Extension Unsupported Send power to Transmitter Unsupported Accept power from Transmitter Supported (PoH) IR Extension Supported RS-232 Extension Supported USB 2.
9. ACRONYMS ACRONYM COMPLETE TERM 4K UHD 4K Ultra-High-Definition (10.2Gbps max) + 4K UHD 4K Ultra-High-Definition (18Gbps max) AVoIP Audio/Video over IP Cat.5e Enhanced Category 5 cable Cat.6 Category 6 cable Cat.6A Augmented Category 6 cable Cat.
ACRONYM COMPLETE TERM USB Universal Serial Bus VGA Video Graphics Array WUXGA (RB) Widescreen Ultra Extended Graphics Array (Reduced Blanking) XGA Extended Graphics Array 14
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279 Email: sales@cypeurope.com www.cypeurope.
