User's Manual

Confidential Google Remote Control User Manual
7/5 0.1, RC1534059/01B
DRAFT
When the remote is stationary, and no keys are pressed (timeout from the last key pressed), the
backlight will turn OFF.
4.3 TV Input Key
When the TV Input Key is pressed, the navigation keys (UP, DOWN, LEFT, RIGHT, OK) will
switch to IR mode for 5s (this value is configurable).
If any other key (such as MENU) is pressed before the 5s timeout, this will cancel the IR mode.
The navigation keys will revert to its previously operating mode.
4.4 IR Mode
The host can configure the Remote to enable / disable IR mode). This is meant to be used in
cases where the TV box can use CEC to control the TV; hence IR control is not needed for the
TV.
In the factory default state, the RCU should generate IR codes for the TV until/unless the TV box
sends a command to ‘Disable TV IR’.
4.5 Database Function & Learn Function
4.5.1 The Database key table
The RC has Database for TV device. The keys supporting the Database are described as below.
All the other keys will act the same as the RC in TV_BOX mode.
Key Name
TV
TV_POWER
YES
INPUT
YES
VOL+
YES
VOL-
YES
MUTE
YES
UP
YES
LEFT
YES
OK
YES
RIGHT
YES
DOWN
YES
YES: This key is available in the current mode.
4.5.2 Set Features for Learn
The RC also supports learn function for keys working in TV mode.