User's Manual

in端 / 方形L孔接出紅色帶電火線 / L terminal with Power Line (Red Line)
N孔接出白色線 / N terminal with White line
out端；並聯端 / Out Terminal in parallel
接地線孔插綠色線 / G Terminal with GND Line ( Green Line)
圖示1
-
單一插座無接地線時
/
Figure 1 ‒ Single socket without GND line
圖示3-插座並聯無接地時 / Figure 3 ‒ Socket in parallel without GND line
圖示2
-
單一插座有接地線時
/ Figure 2 ‒ Single socket with GND line
圖示4
-
插座並聯有接地時
/ Figure 3 ‒ Socket in parallel with GND line
安裝說明
/
Installation Guide
1.使用本公司壁式省電安全插座，使用1.6φ~2.0φ單蕊銅線，剝去1.2cm外露
出銅蕊。
2.安裝插座時，請注意牆壁插座接線盒內，通常有2條線、3條線、四條線或6條
線四種情況(如下列圖式)。
3.本插座已通過臺灣安規。
4.拆銅線時請關電源總開關，方式有兩種
1.請直接用工具剪斷銅線，不用退線。
2.一邊左右旋轉插座同步退線即可。
5.插座開關通電時LED電源指示燈會亮起，切掉插座開關LED電源指示燈則
會燈滅。
6.本插座不適用於工業用5.5φ電線或大於20安培電氣設備上。
7.本插座均採用台灣三大塑膠廠防火塑膠材質，且全部臺灣設計、研發、製造。
Gen-Star AI Wall Socket, it uses 1.6φ ~ 2.0φ single core copper wire with
1.2cm copper core peeled off and exposed.
When installing the socket, please note that there are usually 2 wires, 3
wires, 4 wires, or 6 wires in the wall socket junction box (as shown in the
figure below).
Gen-Star AI Wall Socket has passed Taiwan safety regulations.
Ensure there is no power and turn off the main power switch before
removing copper wires. Two kinds of way for reference.
1. Using a tool to cut the copper wire directly without retracting the wire.
2. Rotating the socket to the left and right and synchronize withdrawal
the line.
LED power indicator lights up when the socket switched on, LED power
indicator lights off when the socket switched off.
5.5φ electric wires for industry or electrical equipment larger than 20
amps does not fit for Gen-Star AI Wall Socket
Gen-Star AI Wall Socket adopts fire-resistant plastic materials from three
major plastic factories in Taiwan, and all are designed, developed, and
manufactured in Taiwan
in端 / 方形L孔接出紅色帶電火線 / L terminal with Power Line (Red Line)
N孔接出白色線 / N terminal with White line
out端；並聯端 / Out Terminal in parallel
in端 / 方形L孔接出紅色帶電火線 / L terminal with Power Line (Red Line)
N孔接出白色線 / N terminal with White line
in端 / 方形L孔接出紅色帶電火線 / L terminal with Power Line (Red Line)
N孔接出白色線 / N terminal with White line