Installation Guide

Table Of Contents
PRODUCT FEATURE
Diamond Vanity Mirror
Installation Manual
S
1 Crystal block
2 Power, Color Temperature & Brightness Touch Control
3 Power Cable
4 Stainless steel base
SETTING UP YOUR MIRROR
1. Carefully unpack the mirror(A), base(B), Stents(C) and screws(D).
2. Using a screwdriver attach the stents(C) to the back of mirror with
metal screws(D).
3. Carefully attach the stents(C) to the base(B) with the metal screws(E).
4.You can now plug the power cable(3) into a power socket. Your
Diamond Vanity Mirror is now ready to use
How to Use the Features
Power, Color Temperature & Brightness Touch Control
1. To Control Lighting Temperature:
First touch will turn on the mirror at the standard color
temperature of 6400K.
Second touch will change the color temperature to 3000K.
The third touch will change color temperature to 4200K.
2. To control Brightness/ Dimming:
Once you have found your desired temperature setting, HOLD
DOWN the touch button to increase or decrease brightness.
WARNINGS!
Please DO NOT Plug in the power cable during installation
All power must be turned OFF until completion.
DO NOT hang, drape or place objects too close to the light frame as
they could burn or melt.
Be cautious when cleaning the mirror surface; do not use abrasive
materials as this will damage the overall finish.
PACKAGE CONTEN
Thank you for purchasing our Diamond Vanity Mirror!
To avoid product damage and personal injuries;
please carefully read and understand all
information in this manual before commencing
with the installation.
T

Summary of content (1 pages)