Installation Guide

APPLY TO BELOW STYLE OF LED MEDICINE CABINET

Please read carefully and save these instructions

Don't discard any of the packaging until you are sure that you have all of the parts and the fitings

Make sure power to the junction box is off before commencing installation.

IMPORTANT

1. Unpack LED cabinet. DO NOT lay cabinet on tiled or concrete surface prior to installation

Cabinet must be on protected surface to prevent chipping of the corners

2. Care must be taken before drilling pilot holes to avoid any existing wiring or pipe work that may

be concealed.

3. A certified electrician must perform all work.The mirror must be connected to a GFI

INSTALLATION

Please refer to below surface mount method.

MAINTENANCE

Wipe clean with a soft damp cloth. Apply glass cleaner to cloth and do not apply directly to mirror

Never use abrasive cleaners as these could damage the finish or exposed LEDstrip 2

INSTALLATIONINSTRUCTIONS