Datasheet

18
4
Malfunctions
In case of malfunctions, please check:
• Compression system and compressed air
supply lines, air consumption l/min and
hose cross section according to the techni
-
cal
standards of the device.
• The compressed air in regard to the occur-
rence
of dust, condensate and rust parti-
cles.
•
Whether the air motor is oiled too much.
• For customer service, please contact your
distributor.
5
Storage
Thedevicemustbestoredaccording
thefollowingconditions.
• Keepdeviceinadryanddust-freeplace.
• Do notexposethe devicetoliquidsand/or
aggressivesubstances.
• Donotstorethedeviceoutdoors.
• Keepthedeviceoutofreachofchildren.
• Storagetemperature:-10°Cto+40°C.
• Relativeairhumidity:max.60%.
6
Disposal
• For disposal, clean tool and disassemble it
according to the regulations for work safety
and environmental protection. Components
can be recycled.
Reducing environmental pollution and pre
-
serving the environment are at the heart of
our
activities.
HAZET – environmental protection is of
fundamental importance to us.
Do not leave any pneumatic tool unattended if it is connected to a com-
pressed air supply. Always wear personal protective equipment!