Datasheet
14
Do not leave any pneumatic tool unattended if it is connected to a compressed air sup-
ply. Always wear personal protective equipment!
2.
Appropriate Use
Operational reliability can only be ensured, if the
tool is used as intended and in compliance with
the indications given in the operating instruc-
tions,
application notes and safety instructions.
Always
ensure that the use and maintenance
of the tool complies with relevant local and
national regulations.
• The tool must only be used if it is in good
working order.
• All safety equipment must always be within
reach and should be checked regularly.
• The intended use of the respective pneu
-
matic
tool is defined in the corresponding
operating instructions and/or application
notes.
• Incorrect use of the HAZET pneumatic
tool or use whilst failing to comply with
the safety instructions can result in serious
injury or death.
• Any deviation from the intended use and/
or any misapplication of the tools is not
allowed and will be considered as improper
use.
• Any claims against the manufacturer and/or
its authorized agents because of damage
caused by improper use of the tools are
void.
• Any personal injury or material losses caused
by improper use of the tool set are the sole
responsibility of the owner.
1. Owner’s Liability
• This tool was developed and manufac-
tured
according to the technical norms
and standards valid at the time and is
considered to be operationally reliable.
Nevertheless, the tool set can present a
danger when it is not used as intended or
in an inappropriate way by non-qualified
personnel. Please make sure that any
person using this tool or carrying out main
-
tenance
work carefully reads the operating
instructions, application notes and safety
instructions and fully understands all infor-
mation
given, before using the tool.
• Keep the operating instructions, application
notes and safety instructions together with
the tool at all times.
• Any modification of the tool is strictly for
-
bidden.
•
All security advices, warning and operation
notices on the device have to be kept leg
-
ible.
Replace all damaged labels or stick-
ers.
•
All indications concerning setting values
and setting ranges must be observed.
2
For your safety