Datasheet

13
Do not leave any pneumatic tool unattended if it is connected to a compressed air sup-
ply. Always wear personal protective equipment!
1
General information
1. General information
• Please make sure that the user of this
tool carefully reads the operating instruc-
tions,
the application note and these safety
instructions and fully understands all infor-
mation
given before it is used.
• The operating instructions, the application
note and these safety instructions contain
important advice that is necessary for safe
and trouble-free operation of your HAZET
tool.
• For effective use of the tool as intended,
it is essential that all safety and other
information in these safety instructions is
adhered to.
• For this reason, always keep the operating
instructions, the application note as well as
these safety instructions together with your
HAZET tool.
• The pneumatic tools have been designed
exclusively for specific applications.
HAZET emphasizes that any modification
to the tool and/or use on an application
not detailed to its intended application are
strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damage to property originating
from improper application, misuse of the
tool or a disregard of the safety instruc
-
tions.
•
Furthermore, the general safety regula-
tions
and regulations for the prevention of
accidents in the application area of this tool
must be observed and respected.
2. Explanation of Symbols
ATTENTION: Please pay attention to these
symbols!
READ THE OPERATING INSTRUCTIONS
AND APPLICATION NOTES!
The owner of this tool is obliged to
read and to observe all application
notes, operating instructions and safety
instructions and should ensure that all
users of this tool use it according to the
information given.
NOTICE!
This symbol marks advice which is
helpful when using the tool.
CAUTION!
This symbol marks important specifi-
cations, dangerous conditions, safety
risks and safety advice.
ATTENTION!
This symbol marks advice which if
disregarded results in damage, mal-
function and/or functional failure of
the device.