Instructions

Documentation Testing Software (Status 28.09.2011)
HAZET
®
Torque-Tester 7901 E , 7902 E, 7903 E
Page 7 from 24
HAZET-WERK GmbH & Co. KG · Postfach 10 04 61 · D-42804 Remscheid · Germany
Telefon [phone] / 7 92-0 · Telefax +49 (0) 21 91 / 7 92-375 · www.hazet.com · [e-mail]
Measuring
In the area <Measuring> you can either check the torque
wrenches being saved in the database and for which a
test certificate was already established or save and print
new certificates. The system contains all torque
wrenches from the current HAZET product range whose
test values are in the range from 2 up to 1000 Nm.
Start Measuring
Select <Start measuring> on the select list
<Measuring>.
Select the required torque wrench in the box <Test
specification> by using the scroll bar.
In the box <Testing equipment> the torque tester e.g.
„HAZET 7901 E“ will be displayed.
In case no torque tester appears in the red box <Testing
equipment>, the required torque tester has to be
registered (see under testing equipment – page 5)
Note: the measurement range of the torque tester must
be adapted for the test values of the torque range
Enter the serial number of the torque wrench to be
tested in the box <Serial number>.