Instructions

Documentation Testing Software (Status 28.09.2011)
HAZET
®
Torque-Tester 7901 E , 7902 E, 7903 E
Page 5 from 24
HAZET-WERK GmbH & Co. KG · Postfach 10 04 61 · D-42804 Remscheid · Germany
Telefon [phone] / 7 92-0 · Telefax +49 (0) 21 91 / 7 92-375 · www.hazet.com · [e-mail]
Test equipment
Here you can modify the technical data of the testing
device, the connection conditions and the transmission
specifications which have been installed during the
loading process of the program, or register another
torque tester.
Note: Bullets 1 to 6 do not have to be modified if the
program was properly installed.
If the data transfer from the testing device to the
computer cannot be realised, the connection conditions
and the transmission specifications have to be adapted
to your computer: Bullets 7 to 13
1. In the select list select  <Master data> <Testing
equipment>.
2. To modify
: mark on list  on the screen at the
bottom on the right the torque tester e.g. HAZET
7901E.
To register a new torque tester: click on
< New >. The input boxes are yellow
3. To modify
: click on  <Edit>.
To register
: enter in the box <Name> the
denomination of the new torque tester
CAUTION: The spelling of the torque tester has to
fit in with the spelling of the testing specifications.
The input boxes are respectively yellow.
4. In the box  <Serial number :> enter the serial
number of the torque tester.
5. In the box  <Range> enter the measuring range
of the testing device.
6. Use the scroll bar to select the torque unit of the
torque tester.




