Instructions

Documentation Testing Software (Status 28.09.2011)
HAZET
®
Torque-Tester 7901 E , 7902 E, 7903 E
Page 19 from 24
HAZET-WERK GmbH & Co. KG · Postfach 10 04 61 · D-42804 Remscheid · Germany
Telefon [phone] / 7 92-0 · Telefax +49 (0) 21 91 / 7 92-375 · www.hazet.com · [e-mail]
Test specification
In the box <Bulk replace> the master data for DIN
standards, testing equipment and templates for selected
or for all test specifications can be replaced by modified
or new master data. For this purpose you first have to
host the master data or to create new master data (see
pages 14-17).
Open the information box <Bulk replace>.
In the first line select what you want to replace by using
the scroll bar: DIN, testing equipment or templates.
In the second line you can select the data you want to
replace by using the scroll bar.
The test specifications which have a check mark will be
changed or updated. If you remove the check mark from
a test specification it will neither be changed nor
updated.
In the last line select the new data which has to be
added as test specification by using the scroll bar.
By clicking on <Replace> you will start the data
exchange.
By clicking on <Yes> in the control box you have to
confirm this procedure.