Instructions

Documentation Testing Software (Status 28.09.2011)
HAZET
®
Torque-Tester 7901 E , 7902 E, 7903 E
Page 17 from 24
HAZET-WERK GmbH & Co. KG · Postfach 10 04 61 · D-42804 Remscheid · Germany
Telefon [phone] / 7 92-0 · Telefax +49 (0) 21 91 / 7 92-375 · www.hazet.com · [e-mail]
Master data / Precision/Tolerance
To enter the data of a new precision/tolerance, please
select on the select list <Master data> <Precision>.
In the table the registered precisions/tolerances are
displayed in per cent (%). If the precision/tolerance of a
new torque wrench is not registered, it has to be added
to the list.
By clicking on <New> another tolerance can be added.
By clicking on <Edit> a registered tolerance can be
modified. The entry boxes are yellow.
Note: If you modify the data, the original data will get
lost. Please consider if you need this precision/tolerance
for future tests.
Confirm by clicking on <OK>.
Note: Mandatory fields left unfilled will be red once the
entry was confirmed by clicking on <OK>.
Master data / DIN
To create a new standard or your own test rules, select
on the select list <Master data> <DIN>.
In the table the registered standards and test
specifications are displayed. If the standard or test rule
of a new torque wrench is not registered, this data has to
be added to the list.
By clicking on <New> a new standard or test rule can be
entered. By clicking on <Edit> a registered standard or
test rule can be changed. The entry boxes are yellow.
Note: if you modify the data, the original data will get
lost. Please consider if you need the data of the
standard for future tests.
Confirm by clicking on <OK>.
Note: Mandatory fields left unfilled will be red once the
entry was confirmed by clicking on <OK>.