Instructions

Documentation Testing Software (Status 28.09.2011)
HAZET
®
Torque-Tester 7901 E , 7902 E, 7903 E
Page 14 from 24
HAZET-WERK GmbH & Co. KG · Postfach 10 04 61 · D-42804 Remscheid · Germany
Telefon [phone] / 7 92-0 · Telefax +49 (0) 21 91 / 7 92-375 · www.hazet.com · [e-mail]
Master data
Master data is entered in order to establish new torque
wrenches, which are not yet represented by the
program, or applied to modify stored torque wrenches.
The program contains all the master data of torque
wrenches from the current HAZET range of products
whose test values are in the range from 2 up to 1000
Nm.
Master data / Manufacturers
To establish a new manufacturer, select on the select list
<Master data> <Manufacturer>.
By clicking on the box <New> you can enter another
manufacturer. By clicking on the box <Edit> you can
change the data of a registered manufacturer. The entry
boxes are yellow.
Note: If you modify the data, the original data will get
lost. Please consider if you need the manufacturer’s data
for future tests.
Confirm by clicking on <OK>.
Note: Mandatory fields left unfilled will be red once you
clicked on the box <OK>.
Master data / Test object
To enter the data of a new torque wrench, select on the
select list <Master data> <Test object>.
By clicking on the box <New> the data of a new torque
wrench can be entered. By clicking on the box <Edit>
the data of a registered torque wrench can be modified.
The entry boxes are yellow.
Note: If you modify the data, the original data will get
lost. Please consider if you need the data of this torque
wrench for future tests.
In the box <Number> you can enter either the type
designation or the article number and in the box
<Description> you can enter a designation of the tool to
be tested, e.g. a torque wrench.
Confirm by clicking on <OK>.
Note: Mandatory fields left unfilled, will be red once the
entry was confirmed by clicking on <OK>.
Note: The test values of a new torque wrench must be in
the measuring range of the torque tester to use.