Instructions

Documentation Testing Software (Status 28.09.2011)
HAZET
®
Torque-Tester 7901 E , 7902 E, 7903 E
Page 13 from 24
HAZET-WERK GmbH & Co. KG · Postfach 10 04 61 · D-42804 Remscheid · Germany
Telefon [phone] / 7 92-0 · Telefax +49 (0) 21 91 / 7 92-375 · www.hazet.com · [e-mail]
Templates
You can create a certificate with your own pictures and
logos. Pictures and logos can only be inserted if they are
in bmp format. To add a picture or logo, use the right
mouse button to select the command <Insert picture>.
Do not use the clipboard (copy/paste).
By marking the picture you can change the size and
position of the picture.
In order to insert tables, use the right mouse button to
select the command <Insert table>.
To be able to display test results, you have to establish a
measurement table. Use the scroll bar  to select
<$TAB_Measurementtable$> and determine the number
of lines and columns.
The measurement table must always be composed of at
least two columns. The first column is a description of
the values (e.g. numbering). The number of lines must
correspond to the number of test values which are
provided by the test specifications or standards.
Note: If the number of lines does not correspond to the
number of test values as indicated in the test
specification, you will get an error message during
printing. Please also see test specification on page 18.
To change the column size of the tables, mark all the
columns of the table. In the ruler at the top, there are
little markers which you can displace.
Change table layout (colours/frame): Mark table <Edit
Table>.
Delete lines: Mark lines, right mouse button <Delete
lines >.
Note: Only lines without contents can be deleted.
Print windows: In the select list, select the required print
window designations, e.g. <$Manufacturer $> by using
the scroll bar .
Print windows can be deleted by double clicking.
Click on <OK> to confirm the entry and to save the
established template.
To be able to use the new template for your certificates,
you have to assign their test specification to the torque
wrenches to be tested as described in test
specification (page 18) or bulk replace (page 19).
